Making Connections - Raymarine REALVISION 3D RV-3 Series Installation Instructions Manual

4.4 Making connections

Follow the steps below to connect the transducer cable to a RealVision™ 3D sonar-capable device
(for example, Axiom RV multifunction display).
1. Ensure that the vessel's power supply is switched off.
2. If your installation comprises split-pair transducers:
i. Connect the cable from each transducer to the Y-cable tails (A80478); check the colored
labels on the cables to ensure that the transducers are connected to the correct Y-cable tail.
ii. Connect an extension cable to the remaining free plug on the Y-cable. See
3D transducer extension
3. Ensuring correct orientation, push the transducer cable (or extension cable) connector fully onto
the corresponding connector on the RealVision™ 3D sonar-capable device (for example, Axiom
RV multifunction display).
4. Turn the locking collar clockwise to secure the cable.
40
cable.
RealVision™