Applicable Products - Raymarine REALVISION 3D RV-3 Series Installation Instructions Manual

2.2 Applicable products

This document is applicable to the RV-300, RV-312(P/S), and RV-320(P/S) RealVision™ 3D plastic
thru-hull transducers.
These transducers are capable of producing 3D sonar images when connected to a RealVision™
3D variant MFD running LightHouse™ 3 software, or a LightHouse™ 3 compatible MFD used in
conjunction with an RVX1000 RealVision™ 3D sonar module. Five transducers are available in the
RV-3xx series, each having the same external shape and dimensions.
Important:
• Plastic thru-hull transducers are recommended for fiberglass and metal hulls and should not be
used on vessels with a wooden hull.
The transducers differ internally, and contain different numbers and types of transmit and receive
elements. Your installation should comprise either a single RV-300 transducer, or a split-pair of
RV-312(P/S) or RV-320(P/S) transducers.
The hull geometry of your vessel determines the most appropriate transducers to use. You should
fit transducers whose internal elements are matched to within ±6° of your hull's deadrise angle, as
shown in the following table:
System
Model no. pack
RV-300 N/A
RV-312P T70320
RV-312S
RV-320P T70321
RV-320S
Document and product information
Part no. Description
A80470 Plastic Thru-Hull
Transducer, 0°, single
("all in one")
A80471 Plastic Thru-Hull
Transducer, 12°, split-pair
A80472
A80473 Plastic Thru-Hull
Transducer, 20°, split-pair
A80474
Hull geometry
Hull with 0° (flat-bottom) to 6° deadrise
angle.
Hull with 6° to 18° deadrise angle, port
side.
Hull with 6° to 18° deadrise angle,
starboard side.
Hull with 14° to 26° deadrise angle,
port side.
Hull with 14° to 26° deadrise angle,
starboard side.
13