Cisco Catalyst 9400 Series Installation Note page 9

Cisco Catalyst 9400 Series 48-Port UPOE Multigigabit Module (C9400-LC-48UX)
Description
Per Slot Bandwidth
Minimum / Maximum Port
3
Density
Support and Restrictions
3
The number of ports available on a single switch
48-port, UPOE Multigigabit Ethernet Module with:
• 24 ports (Ports 1 to 24) 1G POE/POE+/UPOE
• 24 ports (Ports 25 to 48) Multigigabit (mGig) POE/POE+/UPOE
• Hardware ready for IEEE 1588/802.1as— A Precision Time Protocol (PTP) used for time
synchronization across the network for video and audio applications.
• Supports Cisco Phone Discovery and IEEE802.3af and IEEE802.3at.
• Supports Energy Efficient Ethernet (EEE)
• Supports PoE Cable Loss Management
• Saves power with direct power delivery from backplane
• Has a built-in, front-facing, passive RFID tag that uses Ultra High Frequency (UHF) RFID
technology and requires an RFID reader with compatible software. It provides
auto-identification capabilities for asset management and tracking. The RFID tags are
compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C compliant.
They operate in the 860- to 960-MHz UHF band. For more information, see
Identification (RFID on Cisco Catalyst 9000 Family
• The following switching module features are configured in software. See the software
configuration guide for more information:
• Provides per port power consumption measurement
• Enables you to specify maximum power consumption on every port
• Supports PoE Power Configuration with up to 60W power per port on each of its 48
ports.
Per slot bandwidth depends on the supervisor module:
80 Gbps with C9400-SUP-1XL ten-slot chassis or C9400-SUP-1.
120 Gbps with C9400-SUP-1XL seven-slot chassis.
• Catalyst 9407R Switch—48 / 96
• Catalyst 9407R Switch—48 / 240
• Catalyst 9410R Switch—48 / 384
• Can be installed in any non-supervisor module slot.
• Ensure that the chassis power supply configuration supports the PoE budget adequately. Use
the Cisco Power Calculator
requirements for a specific PoE configuration.
Switches).
for power budgeting estimates and to determine power supply
Radio Frequency
9