Cisco Catalyst 9400 Series Installation Note page 17

Cisco Catalyst 9400 Series 48-Port UPOE+ 10/100/1000 Module (C9400-LC-48H)
Description
Per Slot Bandwidth
Minimum / Maximum Port
7
Density
48-port, 10/100/1000 BASE-T Gigabit Ethernet, IEEE 802.3bt compliant module supporting up
to 90 W Cisco UPOE+ on each of its 48 RJ45 ports.
• Hardware ready for IEEE 1588/802.1as— A Precision Time Protocol (PTP) used for time
synchronization across the network for video and audio applications.
• Supports Cisco Phone Discovery and IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt.
• Supports Energy Efficient Ethernet (EEE)
• Supports PoE Cable Loss Management
• Saves power with direct power delivery from backplane
• Has a built-in, front-facing, passive RFID tag that uses Ultra High Frequency (UHF) RFID
technology and requires an RFID reader with compatible software. It provides
auto-identification capabilities for asset management and tracking. The RFID tags are
compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C compliant.
They operate in the 860- to 960-MHz UHF band. For more information, see
Identification (RFID) on Cisco Catalyst 9000 Family
• The following switching module features are configured in software. See the software
configuration guide for more information:
• Provides per port power consumption measurement
• Enables you to specify maximum power consumption on every port
• Supports PoE Power Configuration
• The 10-slot (Catalyst 9410R Switch) chassis has a maximum of 384 1Gbps ports but
can support up to 260 90W PoE ports concurrently.
48 Gbps, full duplex non-blocking traffic
• Catalyst 9404R Switch—48 / 96
• Catalyst 9407R Switch—48 / 240
• Catalyst 9410R Switch—48 / 384
Radio Frequency
Switches.
17