HP NC7170 Overview

QuickSpecs
Overview
The HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter is a networking solution for HP ProLiant servers using twisted-pair
cabling. The NC7170 NIC is available with two different brackets with two different model numbers:
A standard, full size bracket
A half-length, low-profile bracket that fits into HP ProLiant half slots
Both versions run over Category 5 (or better) wiring and are the first HP server adapters to combine dual port 10/100/1000 speeds
with PCI-X bus technology for twisted-pair environments. Along with all the advanced features that HP ProLiant customers have come
to expect, the NC7170 includes support for Wake-on-LAN (WOL), Dual Address Cycles (DAC), and Pre-Boot Execution environment
(PXE).
Models Models
Models Models
HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter
NOTE: NOTE: NOTE: Please see the "Server Support" section for supported HP ProLiant server details. NOTE:
NOTE: The NC7170 supports 10/100/1000Mbps Ethernet speeds as well as a PCI-X 64-bit/133MHz Interface, NOTE: NOTE: NOTE:
and it is backwards compatible with existing PCI bus architectures. Additionally, the NC7170 ships with support
for PCI Hot Plug, Jumbo Frames, Network Fault Tolerance, Load Balancing, and various offload capabilities that
improve performance.
Kit Contents Kit Contents Kit Contents Kit Contents NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter
CD containing Drivers, User Guide, and Installation and Diagnostic Utilities
Quick Install Card
Product Quality Statement
Product Warranty Statement
DA - 11650 Worldwide — Version 24 — July 13, 2009
HP NC7170 PCI-X Dual Port 1000T Gigabit Server HP NC7170 PCI-X Dual Port 1000T Gigabit Server HP NC7170 PCI-X Dual Port 1000T Gigabit Server HP NC7170 PCI-X Dual Port 1000T Gigabit Server
Adapter Adapter Adapter Adapter
313881-B21
Page 1