Table of Contents
Advertisement
BIOS Setup
▶ Recorder Mode, Resolution 100x31
These settings enable/disable the recorder mode and the resolution
100x31.
▶ Legacy OS Redirection Resolution
This setting specifies the redirection resolution of legacy OS.
▶ Putty KeyPad
This setting specifies the type of Putty KeyPad.
▶ Redirection After BIOS POST
This setting specifies the Redirection configuration after BIOS POST.
▶ Intel TXE Configuration
Intel TXE Configuration
▶ TXE FW Version
This item displays the TXE firmware version. Read-only.
▶ TXE
This setting enables/disables the TXE function.
▶ TXE HMRFPO
This setting enables/disables the TXE HMRFPO (Host ME Region Flash Pro-
tection Override) function.
▶ TXE Firmware Update
This setting enables/disables the TXE Firmware Update function.
▶ TXE EOP Message
This setting enables/disables to send EOP Message Before Enter OS.
3-14
[Disable]
Turn off the redirection after POST
[Boot Loader]
Set the Redirection to be active during
POST and Boot Loader
[Always Enable]
Set the Redirection to be always active
Advertisement
Table of Contents
