Table of Contents
Advertisement
by the software.
5. After the tape stops, the Error codes will be displayed by toggling the STOPn key. For more detail explanation, refer to the
(Figure 12-2).
No.
Operation Procedures
1
C-mecha Abnormal Detection shall be
executed for DECK 1 only.
2
[
] key is pressed, after loading in a
NORMAL type cassette with the recording tab
on the left side removed.
Figure 12-2
Micon operation & processing
Check that all DECK mechanism leaf SW are in OFF state.
FF shall be executed for 2 sec, afterwhich STOP.
Check the following.
{ F.REC INH SW } is OFF
{ HALF SW } is ON
Reel pulse toggles between H & L.
31
SA-PM21PC
Advertisement
Table of Contents
