LG TD-V10115E Owner's Manual page 26

ABCDEFG OPERATING YOUR DRYER
Parte # Part 8
11 Dryness Intensity Control
Use this button to set dry level
First, select sensor dry cycle.
Select dry level to adjust how much you want to dry the load. As the cycle runs, the control senses
the dryness of the load and adjusts the time automatically based on the selected dryness level.
Note
DRY LEVEL selections can only be made while using Sensor Dry Cycles. Selecting
MORE Dry or LESS Dry automatically adjusts the needed time which is already sensed.
Rack Dry
The dryer rack is shipped in place in your dryer. Remove and discard andy packing material before use.
The RACK DRY is designed for use with items that you do not want to tumble dry, including sweaters and similar
items. The heated dryer rack allows the heated air inside the dryer to flow in a concentrated pattern allowing effective
and consistent drying. Use RACK DRY to select the desired time.
To use the RACK DRY
1.Open the door.
Hold the dryer rack with
both hands.
2. Put the dryer rack into
the drum
3. Make sure Dryer RACK
is evenly spaced right
onto the drum inside
and door rim.
Note : Check the lint screen and remove any lint
accumulated from items dried on the rack.
Suggested Items
for Rack Drying
Washable wool items
Stuffed toys with
cotton or polyester
fiber filling
Stuffed toys, foam
rubber filled.
Foam rubber pillows
Athletic shoes
Reset time as needed to complete drying.
*
Select MORE TIME or LESS TIME. reset time as needed
to complete drying. refer to the following table.
Select the desired temperature setting to match the fabrics
in your load by pressingTEMP. CONTROL (Air dry-
Ultra Low-Low). Items containing foam, rubber, or plastic
must be dried on a clothes line or by using the Air Dry
Temperature setting ,Refer to the following table.
Start the dryer.
Temperature Suggested
Time*
Setting
(Minutes)
20
Low
Low/Ultra
20/30
Low
Air Dry/
50/30
Ultra Low
Air Dry 50
Air Dry
20
25