Miele KWT 2671 ViS Operating And Installation Instructions page 63

Switching on Push2open
 In Settings mode , use the 
and  sensor controls to select
assistant and select OK to confirm
your selection.
 Use the  and  sensor controls to
select and select OK to confirm
Mode
your selection.
 Use the  and  sensor controls to
select Push2open
confirm your selection.
 Touch the  sensor control to return
to the previous menu level.
– Adjusting the intensity
You can also adjust the intensity of the
Push2open function. The lower the set
intensity, the less force required when
you push against the appliance door.
 In Settings mode , use the 
and  sensor controls to select
assistant and select OK to confirm
your selection.
 In Settings mode , use the 
and  sensor controls to select
tensity and select OK to confirm your
selection.
 Use the  and  sensor controls to
select the right intensity (
High ) and select OK to confirm your
selection.
Door
and select OK to
Door
In-
,
Low Medium
Selecting additional settings
– Adjusting the duration of the Auto-
Close function
You can also adjust the duration for
how long the appliance door will remain
open until it closes automatically.
 In Settings mode , use the 
and  sensor controls to select
assistant and select OK to confirm
your selection.
 In Settings mode , use the 
and  sensor controls to select
and select OK to confirm your
Close
selection.
 Use the  and  sensor controls to
select the duration (5 to 30 seconds)
and touch OK to confirm your selec-
tion.
To protect against inadvertent open-
ing: if you do not pull the appliance
open, it will close again by itself after a
duration defined by you.
Switching on Pull2open
 In Settings mode , use the 
and  sensor controls to select
and select OK to confirm
assistant
your selection.
 Use the  and  sensor controls to
,
select Mode
your selection.
 Use the  and  sensor controls to
select
Pull2open
confirm your selection.
 Touch the  sensor control to return
to the previous menu level.
and select OK to confirm
and select OK to
Door
Auto-
Door
63