Miele KWT 2671 ViS Operating And Installation Instructions page 40

Installation
 Close the appliance door and check
the distance between the door and
adjacent furniture fronts again.
 Place the washers and nuts  back
in position and tighten the nuts .
The furniture front is now secured.
 Now tighten the screws in the angle
trims .
 Open the appliance door.
 Remove the spacers  from the fur-
niture front.
40
Mounting the fixing brackets
The fixing bracket is used to secure the
furniture front to the bottom of the ap-
pliance door.
Do not mount the fixing brackets until
the wine conditioning unit (or side-by-
side combination, if applicable) has
been installed and the furniture fronts
have been aligned.
 Open the appliance door as far as it
will go.
 Slide the fixing bracket  from the
outside onto the screw at the bottom
of the appliance door.