Miele KWT 2671 ViS Operating And Installation Instructions page 18

Installation
If the door hinges of the appliances
are next to each other, you must take
into account the thickness of the fur-
niture fronts and door handles so
that the appliance doors do not col-
lide and become damaged if they are
opened at the same time.
The wine conditioning units/refrigeration
appliances are secured individually in
their building-in niche using the sup-
plied installation material.
If the partition wall a is narrower than
160 mm, you will need the side panel
heater from the side-by-side installation
kit to prevent condensation from form-
ing and any resulting damage.
When planning building-in niches,
please note that the niche into which
the appliance with the side panel
heater is installed must be 4 mm
wider (see "Installation dimensions"
in "Installation").
If the partition wall a is thicker than
160 mm, you do not need the side-by-
side installation kit, nor the side panel
heater.
18
. . . without partition wall
If the wine conditioning units/refrigera-
tion appliances are to be installed next
to each other without a partition wall
between them, they will need to be
joined together with the side-by-side in-
stallation kit. In addition, you must in-
stall the side panel heater to prevent
condensation from forming and any res-
ulting damage.