Lubrication And Maintenance - Meridian SLMD10 Safety And Operation Manual

LUBRICATION AND MAINTENANCE

DANGER!
Do not service or lubricate while the auger is running. LOCK OUT THE POWER
SOURCE!
GEAR BOX
Fill gear box with #90 gear oil quantity as per chart:
AUGER SIZE
SLMD 10
SLMD 12
SLMD 14
Do not overfill gear box.
Change oil once a year.
Grease U-Joint once a day.
SLMD 14 has extra gearbox reducer by the boot.
HEAD END
The bearings are pre-lubricated at the factory and have grease fittings for future lubrication.
HOPPER
All hopper bearings are pre-lubricated and do not require further lubrication.
Grease U-Joint and bushings once daily.
Grease hopper wheels once every season.
HOPPER LIFT
Cable rollers should be oiled once a season.
DRIVE CHAIN
Drive chains should be oiled with #130 gear oil once every season.
PTO SHAFT
PTO shaft and attachment should be greased once a day with a good quality grease.
OPERATIONS
QUANTITY
1/2 L
1/2 L
1/2 L
13000005005-04-00
C2