Maintenance Ii (Replacement Of Lamp) - Panasonic FV-08-11VFL5 Installation Instructions Manual

MAINTENANCE II (REPLACEMENT OF LAMP)
AWARNING
O
Disconnect power source before working on unit.
O
OO
This is a pin type lamp base and the lamp's glass is
fragile. To remove, pull out carefully.
4W night lamp has threaded base. Remove by
turning counterclockwise.
Make sure the temperature of lens and lighting
unit has cooled down before maintenance
(cleaning)or replacement of lamp.
ACAUTION
O
Remove dust and dirt from light cover and lens,
before replace the lamps.
1. Remove grille by pulling down one mounting spring.
Remove plug connector then pull down the other
mounting spring.
(Squeeze mounting spring and pull down carefully)
(Fig.19)
2. Remove the screw as shown in step
T
of Fig.20.
Remove the light cover as shown in step 2) of
Fig.20 .
3. Replace the fluorescent lamps (Please use Maxlite
MLS13GU35 13W) as shown in step
(D
and step 2)
of Fig.21.
4. Replace the 4W night light (Please use ST18 bulb,
Max 4W). (Fig.21)
Install the fluorescent lamps (Please use Maxlite
MLS13GU35 13W) as shown in step 2) and step
of Fig.9 (page 7).
5. Install light cover. (Fig.10 of page 7)
10