Cabling; Wiring The Power Inputs - B&B Electronics EIR508-2-T Series User Manual

Cabling

Use Category 5 cabling for RJ-45 port connections. The cable must be
less than 328 ft (100 meters) long.
Use 9/125 um cable for single-mode fiber. Distances up to 30
Kilometers are supported.
Use 50/125 or 62.5/125 cable for multi-mode fiber. Distances up to
2Km are supported.

Wiring the Power Inputs

1. Insert the positive and negative wires into the V+ and V-
connector on the terminal block connector.
2. Tighten the wire-clamp screws.
[NOTE] Use 12~ 24 AWG wire.
Manual Documentation Number: EIR508-2xx-T 0708m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
V- V+ V- V+
17