Short Message Service (Sms); Comment/Signal Number; Setting; Destination - Mitsubishi Electric a2 Series Programming Manual

α
2 Simple Application Controllers

6.30.4 Short Message Service (SMS)

The GSM/SMS Function Block sends the
SMS message to the address chosen in the
Short Message Service dialog box. Each
GSM/SMS FB can only send a message to
one address.

6.30.5 Comment/Signal Number

Input a comment to label the function block.
The comment will be shown onscreen only
if the "Display Comment" box is checked.
Similarly, the Function Block number will
only be shown onscreen if the "Display
Signal Number" box is checked.

6.30.6 Setting

This box will open the SMS Setting Dialog box. The information for the destination locations is
entered in the SMS Setting dialog box but the final destination is chosen in the Destination
area described below.

6.30.7 Destination

The Destination telephone numbers and e-mail Gateway parameters are shown. Choose the
desired destination phone number or Gateway setting for the specific GSM/SMS Function
Block. The choice of a mobile phone number will complete the selection process. If the
Gateway setting is chosen, the destination e-mail address must be entered in the "E-mail" box.
Every GSM/SMS FB can have a different e-mail address. Press the "OK" button to accept the
settings.
Function Blocks 6
6 - 79