Installing The Nut Breakage Limit Switch (Ba2); Installing The Pulse Generator (Rotational Speed Monitor) - Pfaff SHE Series Operating Instructions Manual

Worm gear screw jack SHE type1 and type2
GB
High-performance screw jack HSE type1 and type2
7.8

Installing the nut breakage limit switch (Ba2)

7.8.1 Distance b, SHE series
Size Dimension b
62,5
SHE 1.1
SHE 3.1 66
68
SHE 5.1
66
SHE 15.1
SHE 20.1 66
86
87
SHE 25
SHE 35.1 94
80
99
SHE 50.1
97
SHE 75
SHE 100.1
7.8.2 Dimension b, HSE series
Size Dimension b
HSE 32
HSE 36.1 66
66
HSE 50.1
66
HSE 63.1
66
HSE 80.1
HSE 100.1 130
89,5
88
HSE 125.1
7.9

Installing the pulse generator (rotational speed monitor)

7.9.1 Pulse by cam
Subject to technical modifications
1. Screw limit switch (6) onto safety nut (8), slightly tighten screw (9).
2. Adjust distance of the limit switch (measurement b).
3. Tighten screws
Secure screws against unintentional loosening.
Observe the tightening torques!
Distance X Limit switches
5 XCK T2110P16
10 XCK T2110P16
10 XCK T2110P16
10 XCK T2110P16
10 XCK T2110P16
10 XCK T2110P16
10 XCK P102
15 XCK T2110P16
10 XCK T2110P16
15 XCK T2110P16
15 XCK T2110P16
15
Distance X Limit switches
10 XCK T2110P16
10 XCK T2110P16
10 XCK T2110P16
10 XCK T2110P16
15 XCK J 567
10 XCK P 2102P16
15 XCK P 2102P16
1. Turn the worm wheel (worm) until the pulse cam is visible in the fixing
thread of the pulse generator.
2. Screw in the sensor until it contacts the outer diameter of the pulse
cam.
3. Turn the transmitter back again by 0.5 to 1 rotation until the distance
between the transmitter and the pin is between 0.5 and 1 mm
(measurement a).
4. Tighten the hexagon nut to fasten the pulse generator. When doing
this, ensure that the pulse generator does not turn!
Design changes under reserve
T13.01.000.0000.0003
2019/04 Rev. Index E
Drawing no.
13.02.103/0023
13.02.105/0000-2600
13.02.108/0000-2600
13.02.109/0000-2600
13.02.115/0028
13.02.115/0027
13.02.012/0046-0000
13.02.035/0016-0000
13.02.035/
13.02.113/0006
13.02.075/0000-2300
Drawing no.
16.02.101/0000-0000Bl05
16.02.113/0000-0000Bl05
16.02.114/0000-0000Bl05
16.02.104/0000-0000Bl05
16.02.105/0000-0000Bl05
16.02.105/0013
16.02.106/0001-0000
Sous réserve de modifications techniques !
17