Page 1
Adjustable Can Ot3ener instruction Model #3108/M6del#3138...
Page 3
Do not operate can opener with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return can opener to the authorized Sunbeam Appliance Service Station for examination, repair or electrical or mechanical adjustment.
Page 4
Plug electrical cord into 120 volt, 60 cycle AC outlet. Raise can opener lever to upright position (A). Insert can so that the lower edge of the can lip rests on top of the drive wheel. Be certain that the cutting edge is on the inside of the can lip as shown (B).Push can opener lever down firmly (C) and hold until the can lid is automatically pierced and the cutting action begins.
Page 5
To insure proper sanitation, all removable parts on the can opener should be detached and cleaned thoroughly in warm, sudsy water at regular intervals. Before cleaning, UNPLUG THE CORD FROM OUTLET. The motor housing easily wipes clean using a damp cloth. Never immerse the motor housing in water.
It will last for years under normal use. Do not attempt to sharpen. Sunbeam-Oster Household Products warrants that, for a period of two years from date of purchase, this product shall be free of mechanical and electrical defects in material and workmanship.
Page 8
When the cutting assembly is raised, pull out as much cord as required to reach the outlet. 01995 Sunbeam-Oster Household Products. Sunbeam@ is a registered trademark of Sunbeam Corporation. All rights reserved. Distributed by Sunbeam-Oster Household Products, Schaumburg. IL 60173 P.N. 61659...