Setup - Chicago Electric 64057 Owner's Manual

Setup

Read the entiRe iMpORtant SaFety inFORMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Place the Welder on a level surface that can bear its weight near the work
area. Leave space around the Welder for proper air flow.
Functions
thermal
Overload
power On
light
power On light:
Lights when is the Welder is powered on.
thermal Overload light:
Lights when the Welder's internal temperature is
too high. Output to the Electrode Holder will turn off
automatically but the Fan will still be operating. Keep
welder on to allow Fan to cool the Welder. When the
internal temperature decreases, the Thermal Overload
Light will turn off and the Welder will be ready to weld.
current adjustment:
Adjusts the current output of the Welder.
Page 8
tO pReVent SeRiOUS inJURy FROM accidental OpeRatiOn:
turn the power Switch off and unplug the welder before set up.
power cord
(on back)
light
electrode Holder
and cable
For technical questions, please call 1-888-380-0318.
On/Off Switch
Fan
(on back)
(on back)
current
adjustment
electrode Holder and cable:
The cable connects to the Welder's positive terminal
and the holder grasps the electrode welding rod.
ground clamp and cable:
The cable connect's to the Welder's negative
terminal and the clamp connects to the workpiece.
power Cord (on back):
Connects to 120VAC GFCI-protected outlet.
On/Off Switch (on back):
Turns Welder power on or off.
Fan (on back):
Cools Welder.
ground clamp
and cable
Item 64057