Recoding/Play - Kurzweil MPS110 User Manual

Chapter 5
MPS110 Details
Recoding / Play
The recording function allows you to record and play your performance.
1. When you press the [
recording will be ready to start (record ready state).
2. If you want to cancel the recording function, press the [
If you press it again before recording starts, the record button goes out and the recording
function is canceled.
3. If you start playing in the recording ready state, the [
starts (Notice: once recording starts, all previously recorded data will be erased).
4. To stop recording, press the [
button, and recording will end.
5. To listen to the recorded song, press the [
up and the recorded song is played back. After playback is complete, the [
go out.
6. To delete a recorded song, hold down the [
will be informed on the screen that the recorded song has been deleted.
7. To record with a rhythm, press the [
the recording with the rhythm after two countdown measures of the rhythm.
However, in order to use this function, a rhythm must be selected in the metronome
mode, not the metronome. The metronome beat cannot be recorded.
16
Details
] button in Program mode, the [
] button. This will turn off the [
] button. The [
] button and press the [
] button while in record ready state. This will start
] button will blink, and
] button again.
] button lights up and recording
] button and the [
]button lights
] button will
] button. You
]