Rfid Setting - Planet HDP-5240PT User Manual

The SIP STUN is used to achieve the penetration of SIP NAT; it is a realization of service. When
the equipment configures the STUN server IP and port (usually the default is 3478), and selects
"Use Stun SIP server", you can make common SIP equipment achieve penetration.

5.3.4 RFID Setting

A. Features
Features
Field Name
Common Settings
Enable DND
Ban Outgoing
Enable Intercom Mute
Enable Intercom Ringing
Enable Auto Dial Out
Auto Dial Out Time
Enable Auto Answer
Auto Answer Timeout
No Answer Auto Hangup
Auto Hangup Timeout
Explanation
DND feature can refuse all incoming calls for all SIP lines, or for individual SIP
line. But the outgoing calls would not be affected.
If it is enabled, no outgoing calls can be made.
If it is enabled, device would mute incoming calls during an intercom call.
If it is enabled, device would play intercom ring tone to alert that there is a new
incoming call during an intercom call.
Enable Auto Dial Out.
Set Auto Dial Out Time.
Enable Auto Answer function.
Set Auto Answer Timeout.
Enable automatically hang up feature when there is no answer.
Configuration in a set time -- The device would automatically hang up when
there is no answer.
720p SIP Multi-unit Video Door Phone with RFID and PoE
55
HDP-5240PT