NEC Electra Elite IPK II System Hardware Manual page 541

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
5. Place the bundled line cord between the WMU-U Unit and the
wall. Lead the line cord out through the slits as shown in
11-48 Leading the Line Cord out of the WMU-U
Figure 11-48 Leading the Line Cord out of the WMU-U Unit
6. Attach the WMU-U Unit to the posts on the wall plate (locally
provided). Place locally provided screws in the nodes on the
WMU-U Unit and secure the WMU-U Unit to the wall.
Posts
Figure 11-49 Attaching the Wall Mount Unit to the Wall
7. Connect the line cord to the Multiline Terminal.
Document Revision 3
Unit.
Nodes
Nodes
Figure
11 - 37