Document Revision 3
___________________________________________________________________________________
S
3
I
ECTION
NSTALLING
3.1
___________________________________________________________________________________
9 - 4
A
DAPTERS
AC-2R/AC-3R Unit (AC Adapter)
This unit shown in
Figure 9-4 AC-2R/AC-3R Unit (AC Adapter)
to ancillary devices or to an Attendant Console. The AC-2R/AC-3R Unit must
be connected to some adapters that are installed on a Multiline Terminal.
When more than one adapter is installed on a Multiline Terminal, only one
AC-2R/AC-3R Unit is necessary.
Figure 9-4 AC-2R/AC-3R Unit (AC Adapter)
The power requirements for the AC-2R/AC-3R Unit are:
Input: 110~240 Vac, 50/60 Hz, 45 VA
Output: 27 Vdc, 750 mA
Polarity:
3.1.1
Connecting the AC-2R/AC-3R Unit
1.
Unplug the AC-2R/AC-3R Unit from the AC outlet.
2.
Prepare Multiline Terminal for adapter installation. Refer to
Section 2 Preparing Multiline Terminal for Adapter Installation
on page
Installing Electra Elite IPK II Optional Terminal Equipment
⊕
Failing to do this can damage the unit and/or the
Multiline Terminal
.
9-1.
Electra Elite IPK II
provides power