Sony Ericsson P990i Working Instruction, Mechanical page 40

Working Instruction, Mechanical
LCD Frame asm continued
Place the LCD frame over the main PBA and snap them
together.
Make sure that the main PBA is in the right position, and
properly latched by the four hooks (two on each side of the
frame).
Gently fold the two flex films to the left (1 and 2).
Connect the two flex film board to board connectors with
your fingers starting with no. 1.
Follow the 4.1.1 - 4.1.5 Reassembly instructions!
3/000 21-1/FEA 209 544/97 A 40(62)
©
Sony Ericsson Mobile Communications AB