Bezel Replacement Asm - Sony Ericsson P990i Working Instruction, Mechanical

Working Instruction, Mechanical

3.9 Bezel Replacement asm

REMOVAL
Follow the 2.1.1 Disassembly instructions!
T
HIS INSTRUCTION DESCRIBES HOW TO REMOVE AND INSTALL
A BEZEL REPLACEMENT ON A PHONE WHERE THE FLIP HAS
.
BEEN REPLACED BY A BEZEL
Use the JCIS bit to remove the two screws from the cabinet
lower sub.
R
EMOVED SCREWS CANNOT BE REUSED AND MUST BE
!
SCRAPPED
Pull the bezel replacement straight backwards to remove it.
INSTALLATION
Gently place the bezel replacement over the cabinet upper
sub.
Apply 15 Ncm ± 2 Ncm of torque for the two new screws
by using the JCIS bit!
3/000 21-1/FEA 209 544/97 A 18(62)
©
Sony Ericsson Mobile Communications AB