Alfa Romeo 8C Spider Owner's Manual page 61

The two modes of the Trip Computer can be
selected by briefly pressing the TRIP button;
Using the button "+" you can scroll the item
shown at the top of the display, while the button
"-" allows you to scroll the items displayed at
the bottom.
To go from the Trip A to the Trip B information,
briefly press the TRIP button.
Procedure when setting off on a trip (reset)
Trip A and Trip B must be reset separately.
Reset Trip A
To reset Trip A, turn the key to MAR and press
and hold down the TRIP button for more than 2
seconds.
WARNING: The counter will automatically be
reset only in the following cases:
- when the "distance travelled" reaches
9999.9 km or when the "travelling time"
reaches 99.59 (99 hours and 59 minutes)
- Every time the battery is disconnected
and reconnected. When the trip is reset, a
warning message appears on the display.
WARNING: When Trip A is reset, the "fuel
range" and "instantaneous consumption" values
are not reset.
Alfawiki.nl
INSTRUMENTS AND CONTROLS
Reset Trip B
For the Trip B values, through the Setup menu
you can select whether you wish to perform a
manual or an automatic reset procedure (see the
chapter "Setup menu" above):
- Manual reset: to manually reset Trip B,
press and hold down the TRIP button for
more than 2 seconds.
- Automatic reset: this occurs each time the
electronic key is inserted in the ignition
block.
When Trip B is reset, a warning message appears
on the display.
WARNING: When Trip B is reset, the "fuel
range" and "instantaneous fuel consumption"
values are not reset.
3
59