Alfa Romeo 8C Spider Owner's Manual page 142

RESTORING THE SPEED
STORED IN THE MEMORY
If the device has been deactivated after braking,
the speed saved previously can be restored as
follows:
- gradually accelerate until you reach a speed
close to that stored;
- engage the gear selected when the speed
5
was stored (4 , 5
th th
C
- press button (RCL).
140
INCREASING THE SPEED
STORED IN THE MEMORY
The speed stored in the memory can be
increased in two ways:
- Depressing the accelerator pedal and then
storing the new speed reached (holding the
dial
or
or 6 gear); - momentarily turning the dial
th
impulse transmitted by the dial will cause
a slight increase in speed (about 1 Km/h),
whereas a constant pressure on the same
dial will cause a continuous increase in
speed. When the dial
speed will automatically be stored.
B turned for more than three seconds)
B to (+): each
B is released, the new
Alfawiki.nl
REDUCING THE SPEED
STORED IN THE MEMORY
The speed stored in the memory can be reduced
in two ways:
- Deactivating the device by depressing the
brake pedal and then storing the new speed
(turning the dial B to (+) for at least three
seconds).
or
B
- Holding the dial turned to (–) until
reaching the new speed, which will
automatically be stored.