Table of Contents
Advertisement
Figure 10. Example of label for installation and commissioning.
14
Design-in Guide - EasyAir SNS300
Labeling for field installation and commissioning
Each SNS300 product bag will include two extra
sticker labels containing unique network addressing
information (example shown in Figure 10). This
address information is critical for the network
commissioning process after the installation.
One label is typically applied to the luminaire
(should be visible after installation) and the other is
placed on the floor plan document during
commissioning.
Be sure to include these labels along with the
luminaire packaging as per the instructions provided
by the network partner for the specific project.
Also be sure to include instructions to the installer
for proper handling of these labels during luminaire
installation.
April 2019
August, 2019
Advertisement
Table of Contents
