Sony DSR-80 Installation Manual page 13

Connection for A/B Roll Editing System
Connection example of the A/B roll editing system using a recorder and two players is shown below.
In this example, DSR-80/80P is used as recorder, DSR-60/60P is used as player-1 and an analog betacam video cassette player UVW-1600/
1600P is used as player-2. When you require the completed tape (the tape in which complete packaged program is stored) in the betacam
format, use a betacam VTR as recorder.
The following system configuration diagram is shown with the main emphasis placed on the signal flow. Refer to the following pages for
actual connection procedure and setting of DSR-80/80P (recorder).
Main video monitor
Video signal generator
(Sony Tectronix
TSG-130 or equivalent)
S O N Y
DME switcher
DFS-500
Video singal
Audio signal
Reference video signal
Control signal
88:88:88:88 88:88:88:88 88:88:88:88
888
Editing control unit
PVE-500 or equivalent (editing side)
DSR-60/60P (player-1)
a) When the DME switcher DFS-500 is used, video signal phase is
delayed due to processing in DFS-500. A delay unit must be
inserted between the audio mixer MXP-290 output and
DSR-80/80P (recorder) audio input.
Audio monitor system
Source video
monitor
DSR-80/80P
(recorder)
Delay unit (DPS-D7
or equivalent)
SONY
00:00.00.
a)
Audio mixer
MXP-290
BETACAM SP
UVW-1600/1600P
(player-2)
7