3. Remove the two screws (B 4x8) on the right and left side
panels. (Be careful not to lose these four screws.)
4. Install the L-angles to the holes described in step 3 with the
supplied screws (PSW 4x16) in RMM-130 for these L-angles.
Note: Never use screws PSW 4x16 to install the right and left
side panels without L-angles. Be sure to install the panels
with the screws B 4x8 removed in step 3. Screws for L-
angles are longer than the side panels. Therefore, using the
screws PSW 4x16 may cause trouble in the unit.
4
Screws (B 4x8)
Screws (PSW 4x16)
L-angle
Screws (B 4x8)
Screws
(PSW 4x16)
L-angle