Equalizer Mode Change; Reset The Speaker Setting; Lg Sound Sync; When Using The Speaker - LG Sound360 NP7860W Manual

Equalizer Mode Change

Speaker has three types of preset Equalizer mode.
Briefly touch EQ button on the speaker. When you
touch EQ button, the EQ settings will be applied in
the order as below:
EQ Mode
Bass Boost Mode
(Low-Band Boost, Default)
Treble Boost (High-Band Boost)
Power Boost Mode
(Full-Band Boost)

Reset the Speaker Setting

You can reset speaker settings such as the paired
device list, volume level, equalizer mode, and mood
LED to default.
1. Touch and hold h , V and C button at the
same time for about 5 seconds.
2. When It is done, the LED light blinks twice.

LG Sound Sync

LG Sound Sync enables you to control some functions
of this speaker by your LG TV remote control. Make
sure that your TV has LG Sound Sync logo as shown
above.
1. Set up the sound output of your TV.
TV setting menu / [Sound] / [TV Sound
output] / [LG Sound Sync (Wireless)]
,
Note
The setting method of LG Sound Sync may differ
depending on the TV. Refer to your TV manual.
2. Touch h button and N button at the same time.

When Using the Speaker

BLUETOOTH®
y When using Bluetooth technology, you have to
LED Blinking
make a connection between the speaker and the
Bluetooth device as close as possible and keep
1
the distance.
However you may experience issues in the cases
2
below :
- There is a obstacle between the speaker and
3
the Bluetooth device.
- There is a device using same frequency with
Bluetooth technology such as a medical
equipment, a microwave or a wireless LAN
device.
y Even if this speaker is connected up to two
Bluetooth devices, you can play and control music
by selecting one of the connected devices.
y Removable/detachable Bluetooth device
(Ex : Dongle etc..) doesn't support multi pairing.
y Multi-pairing connection (Advanced Multipoint) is
only available with Android™ or iOS devices. (Multi-
pairing connection may not be available with some
devices due to their specifications.)
y When two mobile devices are connected to a
speaker, each mobile device operates volume level
independently.
y The sound may be interrupted when the
connection interfered by the other electronic wave.
y Depending on the type of the device, you may not
be able to use the Bluetooth fuction.
y The more distance between the speaker and
the Bluetooth device, the lower sound quality
becomes.
y Bluetooth connection will be disconnected when
the speaker is turned off of the Bluetooth device
gets too far from the speaker.
Operating 11
2