Table of Contents
Advertisement
1. IDENTIFICATION, PACKAGING, TRANSPORT AND STORAGE
1.1 IDENTIFICATION
Each pump is fitted with a metal identification plate (Fig. 1)
which as well as indicating the manufacturer's name and address
and CE mark, displays its technical data, such as:
- Type of pump
- Serial Number
- Flow rate
- Speed (RPM)
- Head
In the case of an assembly (Fig. 2) also:
- Maximum pressure
- Motor power
- Voltage
- Frequency
The serial number uniquely identifies each constructed machine.
Use this number as reference for all communication with the ma-
nufacturer.
CAUTION !
PACKING, LIFTING, HANDLING, TRANSPORT AND UNPACKING OPERATIONS
MUST BE EXCLUSIVELY ENTRUSTED TO PERSONNEL WHO ARE SKILLED IN
THESE PROCEDURES AND KNOW WELL THE PUMP AND THIS MANUAL
1.2 PACKING
Depending on their size, the pumps are shipped in the following way:
- in a wooden crate for some types of pumps and for vertical electric pumps. (Fig. 3)
CAUTION !
The dimensions and relevant net and gross weights are
shown on the packages.
Fig.1
Fig.2
/h
MADE IN ITALY
Fig.3
3
-
-
-
MADE IN ITALY
-
-
-
-
-
Advertisement
Table of Contents
