ABB EDS500 Series Function Manual page 23

Functions
Figure 4: Web interface of a 500NMD02
Login password
not configured
not configured
Configured
Configured
Table 8: Permissions for access of the Web interface
On the left side of the web interface you find the navigation menu, the display area on the
right shows information and possible settings. There are hyperlinks to specific configuration
pages in the navigation menu for the main function units.
All modifications initiated by the web interface effect the running configuration (running-
config) of the device.
Settings that have no dedicated web page can be executed with the help of the built-in
command parser of the web interface.
The function "Commands" is the interface to the command line interface (CLI) of the device
(Chapter 2.2, "Handling of the Command Line Interface (CLI)"). Click on the command
hyperlink to get from one command level to the next or execute a command similar to the
character oriented access methods like Telnet or serial terminal when pressing the Enter key.
If required, icons are shown to inform about e.g. system alarms or that the running-config has
not yet been saved.
Commands to configure the web interface
< s e t s y s t e m w e b - s e r v e r e n a b l e [ h t t p - a n d - h t t p s | n o - h t t p s |
o n l y - h t t p s | r e d i r e c t - t o - h t t p s ] >
1KGT151021 V000 1
Enable password
not configured
Configured
not configured
Configured
Handling in the Web Interface
Password input for
view mode
not possible
Empty password
not possible
Login password
Password input for
configuration mode
Empty password
Enable password
Login password
Enable password
23