Control has four positions corresponding
to the loads given below:
❒ position 0 - load: driver / driver +
front passenger;
❒ position 1 - load: driver + 3 pas-
sengers / driver + 3 passengers +
load stored into the boot (65 kg for
2.2 JTS version, 50 kg for 3.2 JTS
version);
❒ position 2 - load: driver + load stored
into the boot (290 kg for 2.2 JTS
version, 275 kg for 3.2 JTS ver-
sion);
❒ position 3 - not to be used.
IMPORTANT Check headlight slant
each time the transported load changes.
fig. 89
FRONT FOG LIGHT
ADJUSTMENT
Contact Alfa Romeo Authorized Services
to have the headlights correctly adjusted.
HEADLIGHT ADJUSTMENT
ABROAD
The dipped beam headlights are adjust-
ed for circulation in the country in which
the car is marketed. In countries with
opposite circulation, to avoid glaring on-
coming vehicles, proceed as follows:
❒ remove headlight cover (see para-
A0G0050m
graph "Dipped beam headlights" in
section "In an emergency");
❒ move lever A-fig. 89 aside.
99