Operation Ranges - Samsung MH FJEA Series User Manual

Hide thumbs Also See for MH FJEA Series:
Table of Contents

Advertisement

appendix
Water is dripping
from the air flow
blades.
Remote control is
not working.

OPERATION RANGES

The table below indicates the temperature and humidity ranges the air
conditioner can be operated within. Refer to the table for efficient use.
MODE
COOLING
HEATING
DEHUMIDIFYING
POWER SUPPLY
• A ny damage occurs out of condition specified cannot be covered by product warranty. If the system
works continuously outside of conditions, its performance and reliability will be compromised.
• I f the outdoor temperature is as low as 0°C, the heating capacity may drop depending on the
operating condition.
28_appendix
• Check if the air conditioner has been cooling for
an extended period of time with the air flow blades
pointed downwards. Condensation may generate
due to the difference in temperature.
• Check if your batteries are depleted.
• Make sure batteries are correctly installed.
• Make sure nothing is blocking your remote control
sensor.
• Check that there are strong lighting apparatus near
the air conditioner. Strong light which comes from
fluorescent bulbs or neon signs may interrupt the
electric waves.
OPERATING CONDITIONS
Indoor temp: 18˚C~32˚C
Indoor humidity: below 80%
Outdoor temp: -5˚C~43˚C
Indoor temp: below 27˚C
Outdoor temp: -15˚C~24˚C
Indoor temp: 18˚C~32˚C
Indoor humidity: below 80%
Outdoor temp: -5˚C~43˚C
Single phase rated voltage
minimum and maximum limit
IF OUT OF CONDITIONS
- A safety device will stop continuously
the system functioning;
- Condensation may occur on the indoor
unit with risk to have either water blow
off or drops on the floor;
- A safety device will stop continuously
the system functioning;
- A safety device will stop continuously
the system functioning;
- Condensation may occur on the indoor
unit with risk to have either water blow
off or drops on the floor;
220-240V~, 50Hz
198V - 264V

Advertisement

Table of Contents
loading

Table of Contents