Table of Contents
Advertisement
operating basic function
TURNING THE AIR CONDITIONER ON AND OFF
Press the Power button on the remote control.
You will hear a ringing sound and the air flow blade will move up
and down automatically when air conditioner is properly on. The air
conditioner will operate in the most recent operation mode used or
Auto mode.
When you turn off the air conditioner, air flow blade will stop moving
and remain closed.
Turning on/off your air conditioner without the remote control.
You can operate your air conditioner by pressing the Power button on the right bottom side of the
air conditioner.
SELECTING OPERATION MODE
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending
on the room temperature detected by the room temperature sensor.
1.
Turn on the air conditioner.
Press the Power button on the remote control.
2. Set the operation mode.
Press the Mode button on the remote control until
operation mode indicator displays Auto.
The air conditioner will automatically set the fan
speed, and operation mode to Cool or Heat depends
on the room temperature.
When you press the Mode button, mode will change
in order of Auto, Cool, Dry, Fan and Heat.
3. Set the Temperature.
Press the Temp or button on the remote control
to decrease or increase the desired temperature.
You can set the desired temperature between the
range of 16˚C~30˚C.
You can decrease/increase the temperature by 1˚C.
• When the air conditioner is already operating in another mode, press the Mode button
until Auto mode indicator appears on the remote control display.
• When you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
• Air flow can be adjusted manually. (See page 19 for instructions.)
14_ operating
Silence
Silence
Silence
Silence
Silence
Advertisement
Table of Contents
