DREAM MULTIMEDIA DreamBox 500 Manual For Correct Setup page 6

This will get you the free-to-air channels. If you plan to
test other channels (which we don't encourage or condone
your doing) then you need to apply keys. The key files are
SoftCam.Key and AutoRoll.Key for Radegast and
Autoupdate, camd_cfg, Keylist, replace.list, and three
nagra files for Evocamd. Newcamd uses 10 nagra files and
rsakeylist, keylist, and mappings. Most people us all 13
nagra files but the 7's are needed. These file names are
case-sensitive! Most images come with camd_cfg already
present. Do not overwrite this file.
7. Load the keys
8. Install the Emu
recommend Evocamd or Newcamd. Only Evocamd 5.5
and Newcamd 6.01 or later autoupdate the keys.
9. Reboot.
10. You must select the Emu while in the TV mode trying
to watch a channel. Press the
Emu Manager. Select Evocamd or Newcamd by
highlighting the box that says "Common Interface" and
changing to Evocamd or Newcamd by using the right
arrow on the remote. Press the
your chosen Emu. You may remember different Emus per
channel or bouquet.
for Evocamd or Newcamd with DCC.
from the 'Extras' menu. Most people
Blue button to select the
Green button to activate