Optional Planar-Supplied Accessories - Planar Clarity MX46HD Quick Start Manual

Optional Planar-Supplied Accessories

Make sure you have the following optional customer-supplied items as needed to
complete your installation:
• Curved brackets
• Stud adapter bracket
• WallNet
• Wall adapter bracket (see "Wall Adapter Bracket" on page 191)
• Floor stand
• Outer edge/rear cosmetic trim (see "Cosmetic Trim" on page 193)
• Dual link DVI-D cable
• DVI-D cables to go from the source to the Quad controller module
• RS232 cables to link an external controller to the Quad controller module
• Cat 6 -STP video and data cables - Length varies per wall depending on
configuration requirements and your sales order.
• Power cable (20ft-100ft) - Connects the power supply module to the LCD.
Length varies per wall depending on configuration requirements and your sales
order.
• IR sensor extender cable (3m) - Used to extend from the wall to the Quad
controller module.
• Matrix Video Extender Box - The video extender box allows you to extend the
distance of the Quad controller modules to the LCD modules in 100 foot
increments.
• DVI booster - When using the Dual Link In connector for looping between the
Quad controller modules, it may be necessary to add a DVI booster to avoid
having data glitches occur in some installations due to increased noise
sensitivity on that connector.
Clarity Matrix Video Wall Quick Start Guide
Unpacking and Checking Accessories
25