Product Family Overview; Table 2. Intel Server System R1000Spo Product Family Feature Set - Intel R1000SPO Series Technical Product Specification

2.

Product Family Overview

The Intel ® Server System R1000SPO product family offers a variety of system options to meet the varied
configuration requirements of entry level computing environments, and includes several available 1U rack
mount server systems. Each integrated system within this product family is configured around the Intel
Server Board S1200SPO.
This chapter provides a high-level overview of the system features and available options as supported in
different system models within this product family. Greater detail for each major sub-system, feature, or
option is provided in the following chapters.
Table 2. Intel
Feature
Chassis Type
Server Board
Processor Support
Memory
Chipset
External I/O
connections
Internal I/O connectors
/ headers
Intel® I/O Module
Accessory Options
System Fans
Riser Card Support
Video
3
Intel® Server System R1000SPO Product Family TPS
® Server System R1000SPO Product Family Feature Set
1U Rack Mount Chassis
Intel® Server Board S1200SP – (Intel product code - S1200SPO)
One LGA1151 (Socket H4) processor socket

Support for one Intel® Xeon® E3-1200 V5 processor without processor graphics (GT0 or 4+0)

Maximum supported Thermal Design Power (TDP) of up to 80 W.

8 GT/s point-to-point DMI 3.0 interface to PCH

 Two memory channels, four memory DIMM Slots (Two memory DIMMs per channel)
 Support for 2133 MT/s Unbuffered DIMMs (UDIMM DDR4 ECC memory)
Intel® C236 Platform Controller Hub (PCH) chipset
 1x DB-15 video connector
 Two Gigabit Ethernet Ports
 Dedicated RJ-45 server management port
 Two USB 2.0 connectors on back panel
 Two USB 3.0 connectors on back panel
 Two USB 3.0 connectors on front panel
 One Type-A USB 2.0 connector
 One 2x5 pin connector providing front panel support for two USB 2.0 ports
 One 2x10 pin connector providing front panel support for two USB 2.0 / 3.0 ports
The server board includes a proprietary on-board connector allowing for the installation of a variety of
available Intel® I/O modules. An installed I/O module can be supported in addition to standard on-board
features and add-in PCIe* cards.
The Following Intel® I/O Modules are supported:
 AXX4P1GBPWLIOM – Quad port 1GbE I/O based on Intel® Ethernet Controller I350
 AXX10GBNIAIOM – Dual SFP+ port 10GbE based on Intel® 82599 10 Gigabit Ethernet Controller
 AXX10GBTWLIOM3 – Dual RJ-45 port 10G BASE-T based on Intel® Ethernet Controller X540
 Three managed 40mm single rotor system fans
 One power supply fan for each installed power supply module
One x16 PCIe* 3.0 Riser Card H87808-XXX on a x8 Riser slot (slot-6)

 Integrated 2D video controller
 16 MB DDR3 Memory
Description
®