Adjusting The Line Tack Width And; Disengagement Clearance Of Cam Follower - Janome Jem Gold 660 Servicing Manual

ADJUSTING THE LINE TACK WIDTH AND

DISENGAGEMENT CLEARANCE OF CAM FOLLOWER

For the line tack width on buttonhole sewing, both right and left stitch widths should be
even. In an uneven setting, the zigzag width claw will touch the cam when the pattern
selector is turned.
1. Remove the front cover (see page 4).
2. Adjust the line tack by turning the adjusting screw.
(Adjust the left side of the line tack to make it even with the right side tack.)
3. Attach the front cover.
17