Stitch Width Adjusting Key; Stitch Length Adjusting Key; Memory Key; Clear Key - Janome DM7200 Handbook & Instructions

o
!1 !2
!3

Stitch width adjusting key

Press "+" or "–" o to change the stitch width or needle
drop position, depending on the selected stitch pattern.
Refer to pages 24, 27 and 33.

Stitch length adjusting key

Press "+" or "–" !0 to change the stitch length of the
selected pattern. You can also adjust the buttonhole
density, the evenness of darning, and the size of eyelet
with this key. Refer to pages 24, 27 and 33.

Memory key

Press the memory key !1 to memorize the selected
pattern for the pattern combination. Refer to page 54.
!0

Clear key

• In mode 1, 2 A and Á:
Press the clear key !2 to cancel the input and select
the stitch pattern 00 of the selected mode.
• In pattern combination:
Press the clear key !2 to clear the memorized stitch
pattern.
Press and hold the clear key !2 until the buzzer beeps
to clear all memorized stitch patterns. Refer to page
56.

Thread cut memory key

To cut the threads automatically after locking stitches,
press the thread cutter memory key !3 (Refer to page
56).
10