Table of Contents
Advertisement
Procedure
1.
Open a browser session to the SMU. (External: 192.0.2.1; Internal:
192.0.2.2).
2.
Login as Username: admin Password: nasadmin
3.
Collect Diagnostics from the cluster.
a. Navigate to Home > Status and Monitoring > Download
b. Check only the checkboxes and radio button shown below.
c. Click download.
d. Save to a location on your computer.
e. Verify that the archive file can be opened and the contents can be
f. If the archive file contains the words "MISSING_FILES", repeat step 3.
g. Upload both the diagnostic taken in the beginning of the procedure
Replacing a hard disk
If necessary, either of the hard disks in the server can be replaced. Do not
attempt to replace a hard disk unless instructed to do so by customer
support. Hard disk replacement is not a hot-swap operation; replacing a hard
disk requires that the server be shut down and that the power cables are
disconnected from the PSUs.
Hard disk replacement requires that you remove fan assemblies, and remove
and replace the hard disks through the fan mounting area.
Procedure
1.
Make sure you have the new hard disk(s) present.
2.
Shut down the server (see
page 71
Diagnostics
extracted.
If this does not resolve the issue, then check that both nodes are fully
operational and resolve any issues identified before repeating the
procedure.
and this diagnostic to TUF using the SR for the battery replacement.
for more information).
Replacing server components
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference
Rebooting or shutting down a cluster on
65
Advertisement
Table of Contents
