-
Reassembly is performed in a reverse order.
-
The rosette and the lock cover should be restored by applying slight
pressure. When restoring the lock cover, the bolt should be contracted.
2.2.5. Replacing the door panel
-
Replacement of the door panel must be performed when the door and lock
are disassembled (see sections 2. 2. 1. and 2. 2. 4).
-
Remove door shelves. Removing these may be performed by lifting the
shelves. (Figure 29, 30)
Figure 29
-
Place the door – door insert facing downwards – on a protective underlay.
-
Remove fastening screws from the frame edge. (Figure 31)
-
Remove the frame edge from its seating. (Figure 32)
-
Figure 31
10
Figure 30
Figure 32