Check Procedure (Base Unit); Preparation; Pc Setting - Panasonic KX-TCD410RUM Service Manual

12 CHECK PROCEDURE (BASE UNIT)

12.1. Preparation

12.1.1. Equipment Required
·
·
·
·
·
12.1.2. JIGs and PC
·
·
· Batch file

12.2. PC Setting

12.2.1. Connections
12.2.2. PC Setting
SET RTX_COM=1
Note:
Command name
rdeeprom
readid
writeid
setfreq
hookoff
hookon
Getchk
Wreeprom
InitBsPIN.bat
KX-TCD410RU M / KX-TCD410R US / KX-TCD412R UM / KX-TCD412R US / KX-A141RU M / KX-A141RU S / KX-A142RU M / KX-A142RUS
Function
Read the data of EEPROM
Read ID (RFPI)
Write ID (RFPI)
adjust Frequency of RFIC
off-hook mode on Base
on-hook mode on Base
Read checksum
write eeprom
Initial Base PIN to "0000"
Example
Type “rdeeprom 00 00 FF”, and the data from
address “00 00” to “FF” is read out.
Type “readid”, and the registered ID is read out.
Type “writeid 00 18 E0 0E 98”, and the ID “0018 E0 0E
98” is written.
Type “setfreq nn nn”.
Type “hookoff”.
Type “hookon”.
Type “getchk”.
Type "wreeprom 01 23 45". "01 23" is address and "45"
is data to be written.
Type "initBsPIN"