Datatrak Controls And Indicators - Graco REACTOR A-25 Operation

Air operated, electrically heated, plural component proportioner

Hide thumbs Also See for REACTOR A-25:

Table of Contents

DataTrak Controls and Indicators

The DataTrak on the Reactor A-25 sprayers do not have runaway protection. For setup and operation instructions

see DataTrak Operation, page 35.

Key for F

. 4

AB Combined Lower Displacement (user settable)

AC Flow Rate Units (user settable to

gpm [Imperial], oz/min [US], oz/min [Imperial], l/min, or

cc/min)

AD LED (fault indicator when lit)

AE Display

PF Prime/Flush Key (Enables Prime/Flush mode. While in

Prime/Flush mode, the batch totalizer [BT] will not count.)

LED will flash while in Prime/Flush mode.

AE, see details at right

. 4. DataTrak Controls and Indicators

RK Reset Key (Resets faults. Press and hold for 3 seconds to

/min,

gpm [US],

CF Cycle/Flow Rate

BT Batch Totalizer

GT Grand Totalizer

RT Runaway Toggle (leave disabled)

TI11883a

clear the batch totalizer.) Push to toggle between flow rate

and cycle rate.

Run Mode

Setup Mode

ti8622b

ti17741a

3A1569C

Table of Contents