Certificates; Declaration Of Conformity - Viessmann VITOCELL 360-M Installation And Service Instructions Manual

Certificates

Declaration of conformity

We, Viessmann Werke GmbH&Co KG, D-35107 Allendorf, declare as sole respon-
sible body, that the product
Vitocell 340-M and Vitocell 360-M
conforms to the following standards:
DIN 4753
DIN EN 12897
AD2000 datasheets
This product is identified with _-0036 in accordance with the following Directives:
97/23/EC
Details according to the Pressure Equipment Directive (97/23/EC):
■ Heated pressure vessel (not at risk from overheating)
■ DHW and heating water proportion according to article 3, section (3)
■ Solar part according to category II, diagram 5
■ Modules B and C 1 according to appendix III
■ Materials according to AD2000 regulations, individual assessment and appendix I,
4.2, b)
■ Corrosion supplement to appendix I, 2.2 and AD2000 regulations
The pressure device was tested without fitted equipment (safety assembly).
It must be equipped in accordance with current national regulations before installation
and commissioning.
The product characteristics determined as system values for the products
Vitocell 340-M and Vitocell 360-M as part of the EC type testing according to the
Efficiency Directive (see table on page 28) can be utilised to assess the energy con-
sumption of heating and ventilation equipment to DIN V 4701-10 which is specified
by the EnEV [Germany].
Allendorf, 30 March 2009
30
Viessmann Werke GmbH&Co KG
pp. Manfred Sommer