Jumper Settings; Table 2.1: Cpu Speed Selection; Table 2.2: Real-Time Clock Selection - Micronics PCI/ISA System Board D6-IN User Manual

This section gives you the jumper settings used for the D6-IN system
board.
Table 2-1: Jumper settings to select the speed of the CPU.
CPU
Speed
150 MHz 60 x 2.5 Open Close Close Close Close Open
166 MHz 66 x 2.5 Open Close Close Close Open Close
180 MHz 60 x 3.0 Close Open Close Close Close Open
200 MHz 66 x 3.0 Close Open Close Close Open Close
Table 2-1: CPU Speed Selection
Table 2-2: Jumper settings to reset the real-time clock.
Jumper Function
W7 Normal
Clear CMOS
Table 2-2: Real-time Clock Selection
W1 W2 W3 W4
Settings
1-2
2-3
W5 W6