Installing The - Micronics PCI/ISA System Board D6-IN User Manual

1
We know that many experienced people prefer to read as
little of the documentation as possible. If this sounds like
you, here's the short form to get up and running quickly.
1. Make backup copies of your installation and configu-
ration diskettes.
STATIC!
Before
2. Ground yourself to prevent damaging static dis-
handling the
D6-IN, be charge, then remove the D6-IN from its packaging.
properly
grounded by
3. Configure and verify the system board's jumper set-
using a
tings (refer to Jumper Settings in Chapter 2).
special wrist
or ankle
4. Install the CPU and the system memory (refer to
strap, or
touch a
Chapter 3).
safely
grounded
5. Install the system board into the chassis and make all
object.
necessary case connections.
6. Install any ISA and PCI add-on peripherals (refer to
Chapter 3).
7. Now you can connect any optional devices (refer to
Chapter 3).
8. Turn the computer on and press the <F2> key
when you see the screen in Figure 1.1.