A2Dp (Advanced Audio Distribution Profile) - Sony SRS-XB402M Help Manual

Help Guide
Wireless Speaker
SRS-XB402M
Listening to music from the connected BLUETOOTH device
You can enjoy listening to music of a BLUETOOTH device and operate it by the speaker via a BLUETOOTH connection
if it supports the following BLUETOOTH profiles.

A2DP (Advanced Audio Distribution Profile)

Enables you to enjoy high-quality audio contents wirelessly.
AVRCP (Audio Video Remote Control Profile)
Enables you to adjust the volume and operate to play, pause or skip to the beginning of the next/current track.
Operations may vary depending on the BLUETOOTH device. Refer also to the operating instructions supplied with the
BLUETOOTH device.
Note
Make sure beforehand that the volume on the BLUETOOTH device and speaker are set to a moderate level to avoid sudden loud
sound output from the speaker.
Depending on the BLUETOOTH device, adjusting the volume of the speaker may not be possible on the BLUETOOTH device
while playback on the device is stopped/paused.
This speaker does not support the BLUETOOTH profile HFP (Hands-free Profile)/HSP (Headset Profile) that enables hands-free
calls with a BLUETOOTH mobile phone.
On the BLUETOOTH device, make sure that a BLUETOOTH connection is established with the speaker.
1
Start playing music on the BLUETOOTH device.
2
Adjust the volume by pressing the – (volume) button or the + (volume) button on the speaker or operating
3
the BLUETOOTH device.
When you press the – (volume) button or the + (volume) button on the speaker or adjust the volume on the
BLUETOOTH device, the
Depending on the BLUETOOTH device you are using, the speaker's
adjust the volume using the BLUETOOTH device.
Hint
In a noisy place or a place that is exposed to strong winds or echoes (sound reflections), the speaker may fail to detect the
voice command. In such a case, press and hold the
This action is equivalent to saying "Alexa" to the speaker.
(power) indicator flashes once or 3 times.
(power) indicator may not flash, even if you
(play) button until the speaker responds (for about 3 seconds).
32