Standard Horizon Hx750s Owner's Manual page 34

10 dUL ( DW DISPLAY )
Function: Selects the Dual Watch scanning display mode.
Available Values: nor (Normal) / SPL (Special)
Default: nor (Normal)
When "SPL (Special)" is selected the channel shown on the display is the last
channel the HX750S received a call on. This is a handy feature if you cannot
look at the radio the moment a transmission was received.
11 bSY ( BUSY LED )
Function: Enable/Disable the BUSY LED while the squelch
is open.
Available Values: on / oFF
Default: on
12 SOS ( STROBE ILLUMINATION )
Function: Selects the S.O.S Strobe illumination from con-
tinuously on to SOS Strobe.
Available Values: SoS / Cnt (Continuous)
Default: SoS
13 ALt ( WX ALERT )
Function: Enable/Disable the Weather Alert feature.
Available Values: on / SCn / on SC / oFF
Default: on SC
on: When on a weather channel, the radio will alarm when the Weather
Alert is received.
Scn: Emits a load beep when the Weather Alert is received while scanning
the Weather channels.
on SC: Emits a load beep when the Weather Alert is received while receiving
the Weather channel and/or scanning the Weather channels.
oFF: Disable the Weather Alert function.
Page 34 HX750S