Preset Channels ( 0 ~ 9 ) : Instant Access - Standard Horizon Hx750s Owner's Manual

6.9 PRESET CHANNELS ( 0 ~ 9 ) : INSTANT ACCESS

Ten user assigned channels can be programmed for instant access. Pressing
the [ PRESET ] key activates the user assigned channel bank. If the [ PRESET ]
key is pressed and no channels have been assigned, an alert beep will be
emitted from the speaker.
6.9.1 PROGRAMMING
1. Hold down the [ PRESET ] key, and press the [ ] or [ ] key (repeatedly, if
necessary) until the desired channel number is displayed.
2. With the desired channel number displayed, release the
[ PRESET ] key. The Preset Channel number "0" will ap-
pear at the right of the channel number on the display for
1 second.
3. Repeat steps 1 and 2 to program the desired channels into Preset Chan-
nels "1" ~ "9".
4. To delete a Preset Channel, hold down the [ PRESET ] key and press the
[ ] or [ ] key until the Preset Channel number to be deleted is displayed,
then release the [ PRESET ] key.
6.9.2 OPERATION
Pressing the [ PRESET ] key will toggle between Preset Channels "0" through
"9" and the last selected "regular" channel. Preset Channel
"0" is represented by "0" to the right of the channel number
on the display for 1 second, and preset channel "1" is repre-
sented by "1" and so forth. The preset channel number will
disappear after 1 second.
Page 24 HX750S